Third in the series representing a trackside warehouse with large covered center platform.
- Laser cut parts
- Corrugated roofing on removable roof
- Windows and doors can be open or closed
- Footprint 3.5" x 7"
MCS-1039, $80 + shipping
First in a series of freelanced kits depicting our new Monaghan Mine complex. The mine office houses management for all operations.
- Laser cut parts
- Corrugated roofing on removable roof
- 3D printed chimney
- Windows and door can be open or closed
- Includes cribbing Jig (MCS-1038)
- Footprint 2.5" x 4"
MCS-1037, $55 + shipping
This kit represents the Brown, Colorado speeder shed used to protect speeder cars and tools from the elements. Includes an outhouse which can be attached or used separately.
- Laser cut parts
- Craft paper shingles
- Ties and rails for speeder track
- Footprint 2.5" x 2"
MCS-1041, $28 + shipping
Kit represents the warehouse in Chama, New Mexico used for storing wool before shipment.
- Laser cut windows, doors, walls, roof and roof trusses
- Corrugated siding and roofing on a removable roof
- Plank covered loading dock
- Footprint 4" x 8.5"
MCS-1040, $67 + shipping
Cribbing template for the series of new Monaghan Mine complex kits.
- Same template as what is included in MCS-1037, but offered as a separate kit for that want just the cribbing template and strip wood.
- Includes cribbing template and strip wood for about a 5.5" x 2 " section, but instructions included for expanding with your own 12 x 12s.
MCS-1038, $20 + shipping
This kit represents the sand house located outside the southern doors of the Rico, Colorado engine house, and lasted up to RGS abandonment.
- Laser cut walls and roll roofing
- Removable roof
- Footprint 2" x 4.5"
MCS-1036, $50 + shipping
The Montezuma Fruit Co. warehouse in Dolores, Colorado was the second warehouse, since the earlier structure burned in 1923.
- Laser cut walls, windows & doors
- Superior corrugated siding and roofing from Ironworksmodels.com
- MDF inner core for strength
- Removable roof
- Footprint ~5" x ~8" (counting loading platforms)
MCS-1035, $80 + shipping
This bunk house, as modeled, was located in Sargent, Colorado, and is representative of crew lodging structures built along the D&RGW and RGS right of way.
- Laser cut foundation, walls, windows & doors, roofing and siding
- 3D printed chimney
- Removable roof
- Can be raised on laser cut foundation with steps, or flat on the ground
- Footprint 3" x 2.5"
MCS-1033, $50 + shipping
This D&RGW eating house, as modeled, was located in Sargent, Colorado, and is representative of crew structures built along the D&RGW and RGS right of way.
- Laser cut foundation, walls, windows & doors, roofing and siding
- 3D printed chimneys
- MDF inner core for strength
- Removable roof
- Footprint 4" x 7"
MCS-1034, $80 + shipping
This saloon, located in Creede Colorado, takes its name from Nicholas C. Creede, who uttered "Holy Moses" upon his mineral discovery.
- Laser cut walls, windows & doors, roofing and siding
- Decals for windows and front
- MDF inner core for strength
- Removable roof
- Footprint 3" x 3"
MCS-1032, $65 + shipping
This residence, located on Front Street, is representative of small homes built all over the United States in mining, logging and farming communities.
- Laser cut walls, doors, shingle roofing and siding
- 3D printed chimney
- MDF inner core for strength
- Footprint 3" x 3"
MCS-1030, $65 + shipping
This residence, the oldest in Placerville, is representative of small homes built all over the United States in mining, logging and farming communities.
- Laser cut walls, doors, shingle roofing and siding
- 3D printed chimney
- MDF inner core for strength
- Footprint 3.5" x 2.5"
MCS-1031, $65 + shipping
The prototype Cumbres Section House still sits on the D&RGW \ CATSrr route between Anonito and Chama.
- Laser cut walls, windows, doors, shingles siding and interior walls
- Removable roof
- 3D printed chimney & porch posts
- MDF inner shell for strength
- Board by board coal bin construction
- Footprint 6.5" x 6"
MCS-1026, $125 + shipping
This kit requires you to provide your own corrugated material. Warehouse sat behind the Placerville depot, and next to the RGS warehouse. Also known as 'Warehouse B' in some publications. Can be built as 2 separate warehouses at the roof line change seam.
- Laser cut walls, roof, doors, etc.
- MDF core for strength and warp resistance
- Board by board loading dock
- Footprint 18" x 4"
MCS-1029, $100 + shipping
Based on the RGS prototype warehouse behind the Placerville, CO depot. Discounted version MCS-1028 for those who want to provide their own corrugated, rather than the metal foil corrugated.
- Laser cut MDF Inner core for strength
- Removable roof with 16 rafters
- Adhesive backed door/windows
- Small loading docks at trackside doors
- Footprint 5" x 17"
MCS-1027, Corrugated Version - $125 + shipping
MCS-1028, Non-Corrugated Version - $100 + shipping
The prototype Post Office sat behind the Rio Grande Southern depot in Placerville, CO. The structure had several businesses as tenants after the post office moved and still stands today.
- Laser cut walls, doors, tarpaper roofing and siding
- Removable roof
- 3D printed chimney
- MDF inner core for strength
- Footprint 2.5" x 4"
MCS-1023, $65 + shipping
Cafe-Bar from Old Placerville, CO was located where the Rio Grande Southern crossed Leopard Creek and headed east up Dallas Divide.
- Laser cut walls, doors, shingles and siding, and porch floors
- MDF inner core for strength
- Footprint 7.25" x 3.25" (Cafe), 2" x 2" (Pump House)
MCS-1021, $110 + shipping
The prototype Car Inspector's House sat on Cumbres Pass, which was the high point on the D&RGW route between Anonito and Chama, which is now the Cumbres & Toltec Scenic Railroad.
- Laser cut walls, doors, shingles and siding
- Removable roof
- 3D printed chimney
- MDF inner core for strength
- Footprint 4" x 4.5"
MCS-1024, $60 + shipping
The prototype Swede Finn Hall sat behind the Rio Grande Southern depot in Telluride, CO. It was a social club, a fraternal orgnaization, and later a restaurant. The structure still stands today.
- Laser cut walls, doors, shingles and siding
- Removable roof
- 3D printed chimney
- MDF inner core for strength
- Footprint 9.5" x 3.5"
MCS-1022, $80 + shipping
Gas station from Old Placerville, CO was located across the street from the Cafe-Bar.
- Laser cut walls, doors, and siding
- Removable roof with roof trusses
- MDF inner core for strength
- Campbell's corrugated metal roofing
- 3D printed gas pump
- Footprint 6.5" x 2.5"
MCS-1018, $75 + shipping
3 Pack for hunting, fishing, miner or a crib. Side walls can be switched for variety, as well as varying the stain, paint, or materials. Parts are included for 3 complete cabins.
- Laser cut walls, doors, shingles and siding
- Adhesive backed doors and windows
- Tar paper roof and smoke jack
- Rafter and joist ends
- Covered front porch
- Footprint 1.5" x 2.5"
MCS-1025, $50 + shipping
Prototype was in Telluride, CO and typical of many small false front structures.
- Interior plank floors
- Laser cut internal MDF box for strength
- Laser cut adhesive backed windows and doors, simplifies construction.
- Thin waterslide decals
- Footprint 3" x 4.5""
MCS-1017, $60 + shipping
Prototype is from Telluride, CO and was a men's clothing store.
- Laser cut walls, door and tarpaper roofing
- MDF inner core for strength
- Basswood interior scribed flooring
- Basswood board & batten exterior
- Thin waterslide decals
- Footprint 4" x 3"
MCS-1013, $65 + shipping
Prototype structure overlooked the RGS tracks atop Dallas Divide, west of Ridgway, CO.
- Laser cut internal box MDF for strength
- Laser cut adhesive backed windows
- Sawtooth trim on front top floor
- 3D printed chimney
- Laser cut shingles
- Footprint 5.75" x 3.5"
MCS-1006, $80 + shipping
Special thanks to John Coker for allowing us to adapt his watercolor into a kit.
- John Coker https://www.rrart.com.
- Interior walls and floors.
- Laser cut internal box MDF for strength
- Laser cut adhesive backed windows and doors.
- 3D printed chimney
- Laser cut shingles
- Waterslide decal
- Footprint 3" x 4.75"
MCS-1012, $85 + shipping
Prototype structure was in Placerville, CO that sat behind the flour and feed warehouse.
- Laser cut walls, door and shingles
- Inner core MDF for strength
- True to prototype details
- Footprint 1.75" x 3.5"
MCS-1019, $40 + shipping
This false front shoe and boot shop existed around 1910.
- Interior walls, plank floors and rafters
- Laser cut internal box MDF for strength
- Laser cut adhesive windows and doors.
- Footprint 3 1/4" x 4 3/4"
MCS-1014, $75 + shipping
- Prototype sat facing Butterfly trestle on the RGS, a mile west (north) of Ophir Loop.
- Sheds can be built as stand-alone, and windows included for places they shared walls.
- Laser cut internal MDF box for strength
- Laser cut adhesive backed windows and doors
- Tarpaper siding and roll roofing
- Footprint 9" x 2.5"
MCS-1009, $80 + shipping
Kit represents the Telluride, CO speeder shed.
- Also matches the Brown, CO speeder shed
- Includes light duty rail and ties
- Laser cut walls, door and shingles
- Footprint 1.5" x 2"
MCS-1016, $25 + shipping
Prototype still stands next to old RGS ROW
- Laser cut internal MDF box for strength
- Laser cut adhesive backed windows + doors simplifies construction and allows open sashes
- 3D printed school bell + chimney.
- Laser cut shingles
- Front + rear platforms
- Footprint 8" x 3"
MCS-1008, $100 + shipping
Prototype structure sat near the depot in Telluride, CO.
- Laser cut board and batten siding, shingles, and adhesive backed windows and doors.
- Both shingle and corrugated roof elements. - - Legs for decking reflects prototype grade.
- Footprint 2.75" x 2.5"
MCS-1011, $30 + shipping
This barn sat at the west end of Placerville, CO.
- Laser cut board & batten and clapboard siding
- Mount doors open or closed
- Removable roof with trusses
- Laser cut random shingles and hinges
- Inner box MDF walls for strength
- Footprint 3.5" x 4.25"
MCS-1003, $50 + shipping
Prototype sat next to the depot platform
- Laser cut vented windows, doors, shingles, privacy walls, and roof vent.
- Kit can be adapted to other depot restrooms.
- Footprint 2.25" x 2.25"
MCS-1007, $27 + shipping
- Prototype sat sat next to the Dolores passenger depot. Kit contains one restroom.
- Laser cut lap siding and shingles
- Laser cut adhesive backed windows and doors.
- Footprint 1.25" x 2.25"
MCS-1010, $25 + shipping
Pack includes 6 Outhouses with 2 types of siding, shingle and tar paper roofing, board and batten or clapboard, and 3 roof styles.
- Laser cut shingles
- Doors have moon, sun and plain styles
- Toilet seat bench ready for "business"
MCS-1005, $25 + shipping
6 pack of DRGW Trackside phone booths with 2 types of siding, and with and without window openings.
- Laser cut walls, door, window trim, door hinges, and tarpaper roofing
- Board and batten, and plank siding, 3 each.
- Both with and without windows, matching prototype examples
MCS-1020, $35 + shipping
Prototype structures sat alongside RGS tracks atop Dallas Divide, west of Ridgway, CO.
- Tool\Repair shed (originally the depot)
- Coal bin with roof hatch and rear door
- Outhouses for section house and bunk house
- Laser cut board & batten siding
- Laser cut shingles
- Laser cut adhesive backed doors and windows
MCS-1004, $45 + shipping
Request Availability
https://mccarvillestudios.com/contact-us
- Plank floors, interior framing and rafters
- MDF inner box construction
- Plain rear wall or rear doors included
- Laser cut adhesive backed windows and doors.
NOTE: Blackstome C-19s and K-27s fit with doors mounted at doorway corners. ONE K-27 or TWO C-19s fit tandem inside.
- Doorway dimensions: 11'6" W x 13' H depending on track and rail height.
- Footprint 18" x 4"
MCS-1015, $120 + shipping
McCarville Studios has acquired exclusive production rights to the following HO scale Crystal River Products kit.
- HO scale Vance Junction Coal Pocket
Watch this website for news and release dates.
McCarville Studios has acquired exclusive production rights to the following HO scale Crystal River Products kit.
- HO scale Stock Chute
Watch this website for news and release dates.
McCarville Studios has acquired exclusive production rights to the following HO scale Crystal River Products kit.
- HO scale Stock Pens
Watch this website for news and release dates.
This Conoco bulk oil facility, was located on a spur in old Placerville, Colorado. The site included the main building, a small pump house, and a storage tank.
- Laser cut walls, windows & doors and tarpaper panel siding, and corrugated roofing
- 3D printed storage tank
- MDF inner core for strength
- Removable roof
- Footprint 6" x 3" (main building), 1.5" x 1.5" (pump house)
Pricing TBD
Prototype sat next to the Ridgway, CO roundhouse.
- Resin cast brick walls on stone foundation, 3D printed chimney.
- Laser cut loading dock, windows, doors & stairs.
- Shingles & removable roof.
- Designed by Banta Modelworks exclusively for McCarville Studios
- Footprint 9" x 5.5"
HOn3 Rio Grande Southern Ridgway 7 stall roundhouse
- Resin cast brick walls over stone.
- Front wall, doors, windows, & interior beams - Laser cut parts
- Interior wall between goose stalls and 5 stalls
- Rear compressor house and roof vents
- Tarpaper roofing & removable roof
- Designed by Banta Modelworks exclusively for McCarville Studios
- Footprint 13" x 24"
Our kits are craftsman kits, and not intended for novice builders. Kits contain small parts and may be a choking hazard to small children.
Return Policy: Refund from 14 days of purchase for clean, complete and unstarted kits. Buyer responsible for packaging and shipping. Copyright 2022-2024. All rights reserved.