HO, S & O Scale Laser Cut Craftsman Kits
MCS-1002 RGS Ridgway Roundhouse - Only 2 Kits Left
HOn3 Rio Grande Southern Ridgway 7 stall roundhouse
- Resin cast brick walls over stone.
- Front wall, doors, windows, & interior beams - Laser cut parts
- Interior wall between goose stalls and 5 stalls
- Rear compressor house and roof vents
- Tarpaper roofing & removable roof
- Designed and produced for us by Banta Modelworks
- HO Footprint: 13" x 24"
HO scale MCS-1002, $425 + shipping
Placerville Flour & Feed Warehouse - No Corrugated Version
This kit requires you to provide your own corrugated material. Warehouse sat behind the Placerville depot, and next to the RGS warehouse. Also known as 'Warehouse B' in some publications. Can be built as 2 separate warehouses at the roof line change seam.
- Laser cut walls, roof, doors, etc.
- MDF core for strength and warp resistance
- Board by board loading dock
- HO Footprint: 18" x 4"
- S Footprint: 24.5" x 5.5"
HO scale MCS-1029, $100 + shipping
S scale MCS-2029, $120 + shipping
Cumbres Pass Section House - HO Scale
The prototype Cumbres Section House still sits on the D&RGW \ CATSrr route between Anonito and Chama.
- Laser cut walls, windows, doors, shingles siding and interior walls
- Removable roof
- 3D printed chimney & porch posts
- MDF inner shell for strength
- Board by board coal bin construction
- HO Footprint: 6.5" x 6"
HO scale MCS-1026, $125 + shipping
Cumbres Pass Car Inspector's House - HO Scale
The prototype Car Inspector's House sat on Cumbres Pass, which was the high point on the D&RGW route between Anonito and Chama, which is now the Cumbres & Toltec Scenic Railroad.
- Laser cut walls, doors, shingles and siding
- Removable roof
- 3D printed chimney
- MDF inner core for strength
- HO Footprint: 4" x 4.5"
- S Footprint: 5.5" x 6"
HO scale MCS-1024, $60 + shipping
S scale MCS-2024, $75 + shipping
Marv's Cabins 3 Pack - HO & S Scale
3 Pack for hunting, fishing, miner or a crib. Side walls can be switched for variety, as well as varying the stain, paint, or materials. Parts are included for 3 complete cabins.
- Laser cut walls, doors, shingles and siding
- Adhesive backed doors and windows
- Tar paper roof and smoke jack
- Rafter and joist ends
- Covered front porch
- HO Footprint: 1.5" x 2.5"
- S Footprint: 2" x 3.
HO scale MCS-1025, $45 + shipping
S Scale, MCS-2025, $60 + shipping
Placerville Post Office - HO & S Scale
The prototype Post Office sat behind the Rio Grande Southern depot in Placerville, CO. The structure had several businesses as tenants after the post office moved and still stands today.
- Laser cut walls, doors, tarpaper roofing and siding
- Removable roof
- 3D printed chimney
- MDF inner core for strength
- HO Footprint: 2.5" x 4"
- S Footprint: 3" x 5"
HO scale MCS-1023, $65 + shipping
S scale MCS-2023, $80 + shipping
Fraternal Hall - HO scale
The prototype Swede Finn Hall sat behind the Rio Grande Southern depot in Telluride, CO. It was a social club, a fraternal orgnaization, and later a restaurant. The structure still stands today.
- Laser cut walls, doors, shingles and siding
- Removable roof
- 3D printed chimney
- MDF inner core for strength
- HO Footprint: 9.5" x 3.5"
HO scale MCS-1022, $80 + shipping
Old Placerville Cafe-Bar - HO & S scale - AS SEEN IN THE GAZETTE
Cafe-Bar from Old Placerville, CO was located where the Rio Grande Southern crossed Leopard Creek and headed east up Dallas Divide.
- Laser cut walls, doors, shingles and siding, and porch floors
- MDF inner core for strength
- HO Footprint: 7.25" x 3.25" (Cafe), 2" x 2" (Pump House)
- S Footprint: 9.75" x 4.5" (Cafe), 2.75"
HO scale MCS-1021, $110 + shipping
S scale MCS-2021, $130 + shipping
Placerville Gas Station - HO & S Scale
Gas station from Old Placerville, CO was located across the street from the Cafe-Bar.
- Laser cut walls, doors, and siding
- Removable roof with roof trusses
- MDF inner core for strength
- Campbell's corrugated metal roofing
- 3D printed gas pump
HO Footprint 6.5" x 2.5"
S Footprint 8.5" x 3.25"
HO scale MCS-1018, $75 + shipping
S Scale MCS-2018, $90 + shipping
PRE-ORDERS OPEN - Osier Section House - HO & S Scale
The prototype Osier Section House sat on the D&RGW route between Anonito and Chama, which is now the Cumbres & Toltec Scenic Railroad.
- Laser cut walls, windows, doors, shingles and siding
- Removable roof
- 3D printed chimney & posts
- MDF interior walls for strength and detailing
- Go to "CONTACT US" and request to be added to the pre-order list, and specifiy HO or S scale.
HO scale MCS-1030, $125 + shipping
S Scale, MCS-2030, $140 + shipping
PRE-ORDERS OPEN - Sublette Section House - HO & S Scale
The prototype Sublette Section House sat on the D&RGW route between Anonito and Chama, which is now the Cumbres & Toltec Scenic Railroad.
- Laser cut walls, windows, doors, shingles and siding
- Removable roof
- 3D printed chimney & posts
- MDF interior walls for strength and detailing
- Go to "CONTACT US" and request to be added to the pre-order list, and specifiy HO or S scale.
HO scale MCS-1031, $125 + shipping
S Scale, MCS-2031, $140 + shipping
Corrugated or Non-Corrugated versions: Placerville RGS Warehouse - HO Scale
Based on the RGS prototype warehouse behind the Placerville, CO depot. Discounted version MCS-1028 for those who want to provide their own corrugated, rather than the metal foil corrugated.
- Laser cut MDF Inner core for strength
- Removable roof with 16 rafters
- Adhesive backed door/windows
- Small loading docks at trackside doors
- HO Footprint: 5" x 17"
Corrugated Version - HO scale MCS-1027, $125 + shipping
Non-Corrugated Version- HO scale MCS-1028, $100 + shipping
Non-Corrugated version: Placerville 'Warehouse B' - HO Scale
Based on the prototype 'Warehouse B' or Flour and Ore warehouse that sat behind the depot. Buyer supplies their preferred corrugated material.
- Laser cut MDF Inner core for strength
- Removable roof
- Adhesive backed door/windows
- Small loading dock with board by board detail
- HO Footprint: 4.5" x 18"
- Go to "CONTACT US" and request to be added to the pre-order list:
MCS-1029 HO scale , $100 + shipping
Telluride Newspaper Office - HO & S Scale
Prototype was in Telluride, CO and typical of many small false front structures.
- Interior plank floors
- Laser cut internal MDF box for strength
- Laser cut adhesive backed windows and doors, simplifies construction.
- Thin waterslide decals
HO Footprint 3" x 4.5""
S Footprint 4.5" x 6"
HO scale MCS-1017, $60 + shipping
S scale MCS-2017, $75 + shipping
OK Clothing House - HO, S & O Scale
Prototype is from Telluride, CO and was a men's clothing store.
- Laser cut walls, door and tarpaper roofing
- MDF inner core for strength
- Basswood interior scribed flooring
- Basswood board & batten exterior
- Thin waterslide decals
HO Footprint 4" x 3"
S Footprint 5.5" x 4"
O Footprint 7.25" x 5.5"
HO scale MCS-1013, $65 + shipping
S scale MCS-2013, $75 + shipping
O scale MCS-3013, $90 + shipping
Dallas Divide Ranch House - HO, S & O scale
Prototype structure overlooked the RGS tracks atop Dallas Divide, west of Ridgway, CO.
- Laser cut internal box MDF for strength
- Laser cut adhesive backed windows
- Sawtooth trim on front top floor
- 3D printed chimney
- Laser cut shingles
- HO Footprint 5.75" x 3.5"
- S Footprint 7.75" x 4.75"
- O Footprint 10.5" x 6.25"
HO scale MCS-1006, $80 + shipping
S scale MCS-2006, $100 + shipping
O scale MCS-3006, $130 + shipping
Trackside House - HO & S Scale
Prototype structure was in Placerville, CO that sat behind the flour and feed warehouse.
- Laser cut walls, door and shingles
- Inner core MDF for strength
- True to prototype details
HO Footprint 1.75" x 3.5"
S Footprint 2.25" x 4.75"
HO scale MCS-1019, $30 + shipping
S scale MCS-2019, $40 + shipping
Eilte Saloon-Hotel - HO & S Scale - AS SEEN IN THE GAZETTE !
Special thanks to John Coker for allowing us to adapt his watercolor into a kit.
- John Coker https://www.rrart.com.
- Interior walls and floors.
- Laser cut internal box MDF for strength
- Laser cut adhesive backed windows and doors.
- 3D printed chimney
- Laser cut shingles
- Waterslide decal
- HO Footprint ~ 3" x 4.75"
- S Footprint ~ 4" x 6.25"
HO scale MCS-1012, $85 + shipping
S scale MCS-2012, $110 + shipping
Telluride Shoe Shop - HO, S & O Scale
This false front shoe and boot shop existed around 1910.
- Interior walls, plank floors and rafters
- Laser cut internal box MDF for strength
- Laser cut adhesive windows and doors.
HO Footprint 3 1/4" x 4 3/4"
S Footprint 4 1/2" x 6 1/2"
O Footprint 5.75" x 8.5"
HO scale MCS-1014, $75 + shipping
S scale MCS-2014, $90 + shipping
O scale MCS-3014, $110 + shipping
Butterfly Mine Office - HO & S Scale
- Prototype sat facing Butterfly trestle on the RGS, a mile west (north) of Ophir Loop.
- Sheds can be built as stand-alone, and windows included for places they shared walls.
- Laser cut internal MDF box for strength
- Laser cut adhesive backed windows and doors
- Tarpaper siding and roll roofing
- HO Footprint ~ 9" x 2.5"
- S Footprint ~ 12" x 3.5"
HO scale MCS-1009, $80 + shipping
S scale MCS-2009. $100 + shipping
Speeder Shed - HO & S Scale
Kit represents the Telluride, CO speeder shed.
- Also matches the Brown, CO speeder shed
- Includes light duty rail and ties
- Laser cut walls, door and shingles
HO Footprint 1.5" x 2"
S Footprint 2" x 2.5"
HO scale MCS-1016, $25 + shipping
S scale MCS-2016, $35 + shipping
Placerville School House - HO & S Scale
Prototype still stands next to old RGS ROW
- Laser cut internal MDF box for strength
- Laser cut adhesive backed windows + doors simplifies construction and allows open sashes
- 3D printed school bell + chimney.
- Laser cut shingles
- Front + rear platforms
- HO Footprint ~ 8" x 3"
- S Footprint ~10.75" x 4"
:
HO Scale MCS-1008, $100 + shipping
S Scale MCS-2008, $125 + shipping
6 PACK! DRGW Trackside Phone Booths - HO & S Scale
6 pack of DRGW Trackside phone booths with 2 types of siding, and with and without window openings.
- Laser cut walls, door, window trim, door hinges, and tarpaper roofing
- Board and batten, and plank siding, 3 each.
- Both with and without windows, matching prototype examples
HO scale MCS-1020, $25 + shipping
S scale MCS-2020, $35 + shipping
Placerville Barn At The Wye - HO, S & O scale
This barn sat at the west end of Placerville, CO.
- Laser cut board & batten and clapboard siding
- Mount doors open or closed
- Removable roof with trusses
- Laser cut random shingles and hinges
- Inner box MDF walls for strength
- HO Footprint ~ 3.5" x 4.25"
- S Footprint ~ 4.75" x 5.75"
- O Footprint - 6.5" x 7.75"
HO scale MCS-1003, $50 + shipping
S scale MCS-2003, $80 + shipping
O scale MCS-3003, $100 + shipping
Placerville Depot Restroom - HO, S & O scale
Prototype sat next to the depot platform
- Laser cut vented windows, doors, shingles, privacy walls, and roof vent.
- Kit can be adapted to other depot restrooms.
- HO Footprint ~ 2.25" x 2.25"
- S Footprint ~ 3" x 3"
- O Footprint ~ 4" x 4"
HO scale MCS-1007, $27 + shipping
S scale MCS-2007, $37 + shipping
O scale MCS-3007, $55 + shipping
Telluride Depot Restrooms - HO, S & O scale
Prototype structure sat near the depot in Telluride, CO.
- Laser cut board and batten siding, shingles, and adhesive backed windows and doors.
- Both shingle and corrugated roof elements. - - Legs for decking reflects prototype grade.
- HO Footprint ~ 2.75" x 2.5"
- S Footprint ~ 3.5" x 3.75"
- O Footprint ~ 5" x 4.5"
HO scale MCS-1011, $30 + shipping
S Scale MCS-2011, $40 + shipping
O scale MCS-3011, $55 + shipping
Dallas Divide Outbuildings - HO, S & O scale
Prototype structures sat alongside RGS tracks atop Dallas Divide, west of Ridgway, CO.
- Tool\Repair shed (originally the depot)
- Coal bin with roof hatch and rear door
- Outhouses for section house and bunk house
- Laser cut board & batten siding
- Laser cut shingles
- Laser cut adhesive backed doors and windows
:
HO scale MCS-1004, $45 + shipping
S scale MCS-2004, $65 + shipping
O scale MCS-3004, $85 + shipping
Dolores Depot Restrooms - HO, S & O scale
- Prototype sat sat next to the Dolores passenger depot.
- Laser cut lap siding and shingles
- Laser cut adhesive backed windows and doors.
- HO Footprint 1.25" x 2.25"
- S Footprint 1.75" x 3"
- O Footprint 2.25" x 4"
HO scale MCS-1010, $25 + shipping
S scale MCS-2010, $35 + shipping
O Scale MCS-3010, $45 + shipping
Outhouse 6 Pack - HO Scale
Pack includes 6 Outhouses with 2 types of siding, shingle and tar paper roofing, board and batten or clapboard, and 3 roof styles.
- Laser cut shingles
- Doors have moon, sun and plain styles.
- Toilet seat bench ready for "business".
HO scale MCS-1005, $25 + shipping
S scale MCS-2005, $35 + shipping
Telluride, CO Engine House - HO Scale
- Plank floors, interior framing and rafters
- MDF inner box construction
- Plain rear wall or rear doors included
- Laser cut adhesive backed windows and doors.
NOTE: Blackstome C-19s and K-27s will fit with doors mounted at doorway corners. ONE K-27 or TWO C-19s can fit tandem inside.
- Doorway dimensions: 11'6" W x 13' H depending on track and rail height.
HO Footprint 18" x 4"
HO scale MCS-1015, $120 + shipping
SOLD OUT - MCS-1001 Ridgway Office Resin Kit In HO Scale
- Prototype sat next to the Ridgway, CO roundhouse.
- Resin cast brick walls on stone foundation, 3D printed chimney.
- Laser cut loading dock, windows, doors & stairs.
- Shingles & removable roof.
- Collaboration with Banta Modelworks
- HO Footprint ~ 9" x 5.5"
