HO SCALE KITS

This kit creates the Placerville store or warehouse, as its use and location changed over time.

- Laser cut parts

- Corrugated roofing on removable roof

- Interior flooring provided so you can detail the interior as you wish

- Footprint 3" x 6"

MCS-1050 $75 + shipping

This kit creates the bunk house at Brown, Hesperus, Montezuma Lumber Siding (Glencoe), and Mancos, as well as others.

- Bunk house true to prototype

- Laser cut parts

- Laser cut roofing on removable roof

- Windows and doors can be mounted open or closed

- Footprint 2.25" x 3.25"

MCS-1043 $55 + shipping

https://youtu.be/qoQIxgNgBh4

Based on the Brown, CO section house, but also includes parts to allow mirrored floorplans and possible alternate covered porches or front steps. True to prototype along the Rio Grande Southern mainline. 

 - Can be used to build Brown, Hesperus, Mancos, Glencoe (Montezuma Lumber), among others. 

- Bunk house true to prototype

- Laser cut parts

- Laser cut roofing on removable roof

- Windows and doors can be mounted open or closed

- Footprint 5" x 4.5"

MCS-1044 $70 + shipping

https://youtu.be/qoQIxgNgB

Kit represents the warehouse in Chama, New Mexico used for storing wool before shipment.

- Laser cut windows, doors, walls, roof and roof trusses

- Corrugated siding and roofing on a removable roof

- Plank covered loading dock

- Footprint 4" x 8.5"

MCS-1040, $70 + shipping

 The Dolores section house was originally built for the section foreman, but as his family grew in size, he moved to a home nearby.  There was a long shed that ran across the back during later years.  The foreman's house became a supply / storage shed in the mid-forties. 

- Laser cut walls, roofing, windows & doors

- 3D printed chimney

- Footprint 4" x 4"

MCS-1047, $65 + shipping

This saloon, located in Creede Colorado, takes its name from Nicholas C. Creede, who uttered "Holy Moses" upon his mineral discovery.

- Laser cut walls, windows & doors, roofing and siding

- Decals for windows and front

- MDF inner core for strength

- Removable roof

- Footprint 3" x 3"

MCS-1032, $65 + shipping

https://youtu.be/MsUy92ntyuM

 The Montezuma Fruit Co. warehouse in Dolores, Colorado was the second warehouse, since the earlier structure burned in 1923.

- Laser cut walls, windows & doors

- Corrugated siding and roofing on a removable roof

- MDF inner core for strength

- Removable roof

- Footprint ~5" x ~8" (counting loading platforms)

MCS-1035, $80 + shipping

https://youtu.be/VhpxjVoBPCQ

 This kit represents the Rico, Colorado coal shed that sat north of the engine house and in front of the bunk house. 

- Laser cut parts

- Craft paper roll roofing

- Decorative end panels

- Footprint 2" x 3.25"

MCS-1048, $40 + shipping

https://youtu.be/qoQIxgNgBh4

This kit represents the sand house located outside the southern doors of the Rico, Colorado engine house, and lasted up to RGS abandonment.

- Laser cut walls and roll roofing

- Removable roof

- Footprint 2" x 4.5"

MCS-1036, $50 + shipping

https://youtu.be/9a3SOhq7fCg

This 6 pack kit represents the trackside phone booths that the D&RGW used for crew communication.

- Laser cut parts

- 2 styles of siding, board and batten and clapboard

- Tarpaper roofing

MCS-1020, $25 + shipping

Third in the series representing a trackside warehouse with large covered center platform. 

- Laser cut parts

- Corrugated roofing on removable roof

- Windows and doors can be open or closed

- Footprint 3.5" x 7"

MCS-1039, $80 + shipping

First in a series of freelanced kits depicting our new Monaghan Mine complex. The mine office houses management for all operations.

- Laser cut parts

- Corrugated roofing on removable roof

- 3D printed chimney

- Windows and door can be open or closed

- Includes cribbing Jig (MCS-1038)

- Footprint 2.5" x 4"

MCS-1037, $55 + shipping

https://youtu.be/_yZ7XH9PS2w

Cribbing template for the series of new Monaghan Mine complex kits.

- Same template as what is included in MCS-1037, but offered as a separate kit for that want just the cribbing template and strip wood.

- Includes cribbing template and strip wood for about a 5.5" x 2 " section, but instructions included for expanding with your own 12 x 12s.

MCS-1038, $20 + shipping

https://youtu.be/_yZ7XH9PS2w

The prototype Car Inspector's House sat on Cumbres Pass, which was the high point on the D&RGW route between Anonito and Chama, which is now the Cumbres & Toltec Scenic Railroad.

- Laser cut walls, doors, shingles and siding

- Removable roof

- 3D printed chimney

- MDF inner core for strength

- Footprint 4" x 4.5"

MCS-1024, $60 + shipping

This kit represents the Brown, Colorado coal shed, but also is similar to the Rico coal shed that was next to the bunk house in the yard.

- Laser cut parts

- Craft paper roll roofing

- Decorative end panels

- Optional man door to use as necessary 

- Footprint 2" x 3.25"

MCS-1042, $40 + shipping

https://youtu.be/qoQIxgNgBh4

This kit represents the Brown, Colorado speeder shed used to protect speeder cars and tools from the elements. This also works for Telluride's yard.  Includes an outhouse which can be attached or used separately.

- Laser cut parts

- Craft paper shingles

- Ties and rails for speeder track

- Footprint 2.5" x 2"

MCS-1041, $28 + shipping

https://youtu.be/qoQIxgNgBh4

Cafe-Bar from Old Placerville, CO was located where the Rio Grande Southern crossed Leopard Creek and headed east up Dallas Divide.

- Laser cut walls, doors, shingles and siding, and porch floors

- MDF inner core for strength

- Footprint 7.25" x 3.25" (Cafe), 2" x 2" (Pump House)

MCS-1021, $110 + shipping

https://youtu.be/CPBYovER5Xo

This residence, located on Front Street, is representative of small homes built all over the United States in mining, logging and farming communities.  

- Laser cut walls, doors, shingle roofing and siding

- 3D printed chimney

- MDF inner core for strength

- Footprint 3" x 3"

MCS-1030, $65 + shipping

https://youtu.be/p-O5ESjmgQk

This residence, the oldest in Placerville, is representative of small homes built all over the United States in mining, logging and farming communities. 

- Laser cut walls, doors, shingle roofing and siding

- 3D printed chimney

- MDF inner core for strength

- Footprint 3.5" x 2.5"

MCS-1031, $65 + shipping

https://youtu.be/p-O5ESjmgQk

The prototype Post Office sat behind the Rio Grande Southern depot in Placerville, CO.   The structure had several businesses as tenants after the post office moved and still stands today.

- Laser cut walls, doors, tarpaper roofing and siding

- Removable roof

- 3D printed chimney

- MDF inner core for strength

- Footprint 2.5" x 4"

MCS-1023, $65 + shipping

https://youtu.be/oqVXwpGdOtk

Prototype is from Telluride, CO and was a men's clothing store.

- Laser cut walls, door and tarpaper roofing

- MDF inner core for strength

- Basswood interior scribed flooring

- Basswood board & batten exterior

- Thin waterslide decals

- Footprint 4" x 3"

MCS-1013, $65 + shipping

https://youtu.be/vvXbfpJw5F4

Gas station from Old Placerville, CO was located across the street from the Cafe-Bar.

- Laser cut walls, doors, and siding

- Removable roof with roof trusses

- MDF inner core for strength

- Corrugated siding and roofing on a removable roof

- 3D printed gas pump

- Footprint 6.5" x 2.5"

MCS-1018, $75 + shipping

https://youtu.be/cTyX3FzakEU

Prototype was in Telluride, CO and typical of many small false front structures.

- Interior plank floors

- Laser cut internal MDF box for strength

- Laser cut adhesive backed windows and doors, simplifies construction.

- Thin waterslide decals

- Footprint 3" x 4.5""

MCS-1017, $60 + shipping

https://youtu.be/NDisE-cwJrg

The prototype Swede Finn Hall sat behind the Rio Grande Southern depot in Telluride, CO. It was a social club, a fraternal orgnaization, and later a restaurant.  The structure still stands today.

- Laser cut walls, doors, shingles and siding

- Removable roof

- 3D printed chimney

- MDF inner core for strength

- Footprint 9.5" x 3.5"

MCS-1022, $80 + shipping

 https://youtu.be/APKYrML1qjE 

The prototype Cumbres Section House still sits on the D&RGW \ C&TS RR route between Anonito and Chama.

- Laser cut walls, windows, doors, shingles siding and interior walls

- Removable roof

- 3D printed chimney & porch posts

- MDF inner shell for strength

- Board by board coal bin construction

- Footprint 6.5" x 6"

MCS-1026, $150 + shipping

https://youtu.be/bENJXdsnUNU

 This kit represents the Telluride. CO engine house late 1890s-early 1900.

- MDF framing inner box construction

- Laser cut components and interior walls, floor and rafters.

- Plain board and batten rear wall or rear doors included.

- Note that the doors will allow up to 12' HO scale width engines, and Blackstome C-19s and K-27s will fit with doors mounted at doorway corners. One K-27 or 2 C-19s can fit tandem inside.

- Footprint 18" x 4" with doors opened.

MCS-1015, $120 + shipping

 This D&RGW eating house, as modeled, was located in Sargent, Colorado, and is representative of crew structures built along the D&RGW and RGS right of way. 

- Laser cut foundation, walls, windows & doors, roofing and siding

- 3D printed chimneys

- MDF inner core for strength

- Removable roof

- Footprint 4" x 7"

MCS-1034, $80 + shipping

https://youtu.be/831rgemHSiE

 This bunk house, as modeled, was located in Sargent, Colorado, and is representative of crew lodging structures built along the D&RGW right of way. 

- Laser cut foundation, walls, windows & doors, roofing and siding

- 3D printed chimney

- Removable roof

- Can be raised on laser cut foundation with steps, or flat on the ground

- Footprint 3" x 2.5"

MCS-1033, $50 + shipping

https://youtu.be/831rgemHSiE

3 Pack for hunting, fishing, or miner cabins. Side walls can be switched for variety, as well as varying the stain, paint, or materials. Parts are included for 3 complete cabins.

- Laser cut walls, doors, shingles and siding

- Adhesive backed doors and windows

- Tar paper roof and smoke jack

- Rafter and joist ends

- Covered front porch

- Footprint 1.5" x 2.5"

MCS-1025, $50 + shipping

Prototype structure overlooked the RGS tracks atop Dallas Divide, west of Ridgway, CO.

- Laser cut internal box MDF for strength

- Laser cut adhesive backed windows

- Sawtooth trim on front top floor

- 3D printed chimney

- Laser cut shingles

- Footprint 5.75" x 3.5"

MCS-1006, $80 + shipping

https://youtu.be/Spx4zMr0YGM

 Special thanks to John Coker for allowing us to adapt his watercolor into a kit.

- John Coker https://www.rrart.com.

- Interior walls and floors.

- Laser cut internal box MDF for strength

- Laser cut adhesive backed windows and doors.

- 3D printed chimney

- Laser cut shingles

- Waterslide decal

- Footprint 3" x 4.75"

MCS-1012, $85 + shipping

https://youtu.be/QR27v-QJrMk

Prototype structure was in Placerville, CO that sat behind the flour and feed warehouse.

- Laser cut walls, door and shingles

- Inner core MDF for strength

- True to prototype details

- Footprint 1.75" x  3.5"

MCS-1019, $45 + shipping

https://youtu.be/p-O5ESjmgQk

https://youtu.be/xieTkgdk3ss

This false front shoe and boot shop existed around 1910.

- Interior walls, plank floors and rafters

- Laser cut internal box MDF for strength

- Laser cut adhesive windows and doors.

- Footprint 3 1/4" x 4 3/4"

MCS-1014, $75 + shipping

https://youtu.be/e4xW0KHCDJc

- Prototype sat facing Butterfly trestle on the RGS, a mile west (north) of Ophir Loop.

- Sheds can be built as stand-alone, and windows included for places they shared walls.

- Laser cut internal MDF box for strength

- Laser cut adhesive backed windows and doors

- Tarpaper siding and roll roofing

- Footprint 9" x 2.5"

MCS-1009, $80 + shipping

https://youtu.be/rq8tYBvw5Yc

Prototype still stands next to old RGS ROW

- Laser cut internal MDF box for strength

- Laser cut adhesive backed windows + doors simplifies construction and allows open sashes

- 3D printed school bell + chimney.

- Laser cut shingles

- Front + rear platforms

- Footprint 8" x 3"

MCS-1008, $100 + shipping

https://youtu.be/kPHQa_SQmlw

 Prototype structure sat alongside RGS tracks at the wye west of Placerville, CO.

- Laser cut board & batten siding

- Laser cut shingles

- Laser cut hinges

- Footprint 5.5" x 4"

MCS-1003, $50 + shipping

Prototype structure sat near the depot in Telluride, CO.

- Laser cut board and batten siding, shingles, and adhesive backed windows and doors.

- Both shingle and corrugated roof elements.  - - Legs for decking reflects prototype grade.

- Footprint 2.75" x 2.5"

MCS-1011, $30 + shipping

Prototype sat next to the depot platform

- Laser cut vented windows, doors, shingles, privacy walls, and roof vent.

- Kit can be adapted to other depot restrooms.

- Footprint 2.25" x 2.25"

MCS-1007, $27 + shipping

- Prototype sat sat next to the Dolores passenger depot.  Kit contains one restroom.

- Laser cut lap siding and shingles

- Laser cut adhesive backed windows and doors.

- Footprint 1.25" x 2.25"

MCS-1010, $25 + shipping

This kit represents the Telluride, Colorado speeder shed used to protect speeder cars and tools from the elements. - HO Scale

- Laser cut parts

- Craft paper shingles

- Ties and rails for speeder track

- Footprint 2" x 2"

MCS-1016, $25 + shipping

The prototype RGS warehouse sat behind the Rio Grande Southern depot in Placerville, CO. 

- Laser cut main structure, removable roof with 16 rafters, windows and doors, and small loading docks at trackside doors.

- Corrugated siding and roofing on a removable roof

- Doors and windows are adhesive backed for easy assembly, and attached in open or closed position. 

- Footprint 17" x 5"

MCS-1027, $130 + shipping

The prototype Flour & Feed warehouse sat behind the Rio Grande Southern depot in Placerville, CO.

- Laser cut walls, doors, and roofing

- Corrugated siding and roofing on a removable roof. 

- Removable roof

- MDF inner core for strength

- Footprint 18" x 4"

MCS-1029, $125 + shipping

https://youtu.be/A9dr6-Cln1w

 Prototype structures sat alongside RGS tracks atop Dallas Divide, west of Ridgway, CO.

- Tool\Repair shed (originally the depot)

- Coal bin with roof hatch and rear door

- Outhouses for section house and bunk house

- Laser cut board & batten siding

- Laser cut shingles

- Laser cut adhesive backed doors and windows

MCS-1004, $45 + shipping

This Conoco fuel kit is based on the Telluride structure and fuel tank, but could represent many other locations and fuel companies.

- Laser cut parts with removable roof

- 3D printed tank

- Craft paper corrugated

- Period accurate decal sign

- Footprint 5.5" x 5" (main building)

MCS-1046, $100 + shipping

https://youtu.be/pf17PthLHVE

This kit represents the Old Placerville, Colorado Conoco facility, including the main structure, pump house, and storage tank.

- Laser cut parts with removable roof

- 3D printed tank

- Craft paper corrugated roofing

- Craft paper tar-paper siding

- Period accurate decal sign

- Footprint 6" x 3" (main building), 1.5" x 1.5" Pump House

MCS-1045, $100 + shipping

https://youtu.be/NAy4pcITIJY

Roof style variety, board and Batten and plank siding siding, shingles and tarpaper roofing, toilet bench seat.

- Laser cut vented windows, doors, and shingles.

MCS-1005 , $25 + shipping

McCarville Studios has acquired exclusive production rights to the following HO scale Crystal River Products kit.

- HO scale Stock Chute

Watch this website for news and release dates.

McCarville Studios has acquired exclusive production rights to the following HO scale Crystal River Products kit.

- HO scale Stock Pens

Watch this website for news and release dates.

McCarville Studios has acquired exclusive production rights to the following HO scale Crystal River Products kit.

- HO scale Vance Junction Coal Pocket

Watch this website for news and release dates.